Hi Vivek.

Me a problem has arisen in the console capture traps when the start about the first hour the trap received match the PC time, but from the moment the trap capture time have a lower than even PC times loops are formed. If I close the console and I open the trap has to be received back in an hour but the hour is the problem reoccurs. I need to resolve this because the traps are recividos alarms that then I have to submit reports and need the time is right.
I tested with the network settings UDP and Raw Shockets and the result is the same.

Greetings

Julio,

What version of Unbrowse are you using ? Go to Help > About.

This problem was fixed long back.


Thanks,

Hello.

The version is 1.6.0.1300.

Thanks.

Hi Julio,


Is this the behavior you are seeing ?

1. Trap console starts
2. For about 1 hour the timestamps shown in the trap console is correct
3. After an hour or so, the timestamps shown in the trap console start falling behind PC time (lesser than PC time)


How far back is the drift ? Just a few seconds or a few minutes.


Thanks,

Hello.

Enough but is often delayed 30 minutes.
For example the other day that we created a time loop of the day he arrived at 15/02/2011 00:52 spent a day at 23:12 and 14/02/2011 when he passed the 15 day delay was again day 14.

Greetings.

Hi Julio,

Thanks for waiting.

Can you download and try this fix ?

www.unleashnetworks.com/lib/private/setu...wse_R_1_6_0_1303.msi


FYI : I was not able to reproduce the error here, but this new build has an additional check that might prevent it.

Please let me know if this works.

Thanks,